BRIX-IT is suitable for all bicycles with a tire width between 25 mm and 65 mm. Important: The rear wheel fender should not extend beyond the center of the tire.

Please do not use the BRIX-IT on bicycles where the mudguard extends beyond the axle center, as it may fall out. When placing your bicycle vertically, make sure you first position the rear wheel against the wall and then push the front wheel into the BRIX-IT. Double-check that the rear wheel is indeed against the wall. When pulling out, it is recommended to keep the rear brake applied.

BRIX-IT is ONLY suitable for bicycles. It is not suitable for other items.

BRIX-IT is suitable for both indoor and outdoor use.

Simply screw the BRIX-IT bicycle mount to the wall at wheel axle height. For vertical mounting, slide the front wheel into the BRIX-IT and ensure that the rear wheel is flush against the wall. For horizontal mounting, slide the rear wheel into the BRIX-IT. Check that it is really stable in the BRIX-IT, and you're done.

The wall plugs must be suitable for the material of your wall.Make sure that BRIX-IT is 100% securely mounted.Determine the correct mounting height using the wheel axle center of your bicycle.

For assembly you will need:Pothole drilling machinetwo wall plugsappropriate screws for mounting the BRIX-ITHand screwdriver for 2.5 mm Phillips head screws

For fastening, dowels suitable for the wall material must be selected. Tip: To ensure a perfect hold, we recommend applying mounting mortar to the dowels.